Hunter Industries - The Irrigation Innovators
Flow-Clik™ Specifications
Flow-Clik™ MODELS
FCT Sensor Bodies:
FCT 100 (4.8" H x 2.3" W x 4.5" L) Sch. 40
FCT 150 (5.4" H x 2.3" W x 4.6" L) Sch. 40
FCT 158 (5.4" H x 2.3" W x 5.1" L) Sch. 80
FCT 200 (5.9" H x 2.7" W x 4.7" L) Sch. 40
FCT 208 (6.0" H x 2.9" W x 5.4" L) Sch. 80
FCT 300 (7.0" H x 4.0" W x 6.2" L) Sch. 40
FCT 308 (7.0" H x 4.2" W x 6.4" L) Sch. 80
FCT 400 (6.5" H x 5" W x 6.5" L) Sch. 40
Interface Panel (Flow-Clik Only):
(4.5" H x 5.5" W x 1.5" D) Not required for Flow-Clik IMMS

OPERATING SPECIFICATIONS
• Temperature: 0-150 degrees F
• Pressures: up to 200 PSI
• Humidity: up to 100%

FLOW-CLIK INTERFACE PANEL
36" leads provided for easy wiring to controller
(2 wires to controller 24VAC terminals and 2 wires to sensor and terminals)

ELECTRICAL SPECIFICATIONS
• Current draw: @24VAC .025 Amps
• Switching current: 2.0 Amps
• Maximum distance between interface panel and sensor = 1000 ft.
(18 gauge minimum wire size) 2 wires required for Flow-Clik Sensor,
4 wires required for Flow-Clik IMMS Sensor to IMMS Interface

FLOW-CLIK ADDITIONAL FEATURES
• Programmable start up delay (0 to 300 Seconds)
• Programmable interrupt period (2 to 60 Minutes)
• System status indicator light
• One button system calibration to highest flow zone
SPECIFICATION GUIDE
EXAMPLE: FLOW-CLIK - 150
MODEL
HFS =Real time flow meter for ACC controllers
FLOW-CLIK = Standard Version for all 24VAC Controllers
(includes sensor and interface panel)
FLOW-CLIK IMMS = Version for use with IMMS™ Central Control
(includes sensor only - interface panel not required for IMMS™)		 FEATURES
100 = 1" Schedule 40 Sensor Body
150 = 1 1/2" Schedule 40 Sensor Body
158 = 1 1/2" Schedule 80 Sensor Body
200 = 2" Schedule 40 Sensor Body
208 = 2" Schedule 80 Sensor Body
300 = 3" Schedule 40 Sensor Body
308 = 3" Schedule 80 Sensor Body
400 = 4" Schedule 40 Sensor Body